Our team brings over 20 years of experience in Concentrated Solar Technology, with an international project portfolio. Discover our projects.
Andasol 3, Spain
Andasol 3, Spain
Technology: Parabolic trough CSP
Capacity: 3 × 50 MW with 7 hours of thermal storage
Services: O&M advisory services
Contribution:
- Modified logic in DCS and local controllers Onsite training and performance improvement instructions
- Sun sensor for accurate tracking
- Temperature control support
Shagaya, Kuwait
Technology: Parabolic trough CSP
Capacity: 50 MW and 9 hours of storage
Services: O&M advisory services
Contribution:
- Root Cause Analysis (RCA) of HCEs breakages
- RCA of Mirror erosion
- Solar field temperature control
- Solar field cleaning strategy
DEWA IV, United Arab Emirates
Technology: Parabolic trough CSP
Capacity: 600 MW and 12 hours of storage
Services: O&M advisory services
Contribution:
- Support by monitoring remotely the plant’s performance
- Balancing improvement
- Temperature control
- Automatic flow control improvement
- Solar field cleaning strategy
- Provide written instructions for any SF performance improvements
Ashalim Plot A, Israel
Technology: Parabolic trough CSP
Capacity: 110 MW and 4 hours storage
Services: O&M advisory services, feasibility study
Contribution:
- Remote and in person plant performance monitoring & routine support
- RCA services:
- Ball joint failures
- Mirror corrosion
- Cleaning strategy improvement
- Onsite training and for solar field performance improvements:
- Temperature control
- Balancing
- Logic changes in the DCS and the Local controllers
- Dynamic Offset improvement
- Wind speed alarm
- HTF decomposition mitigation
Delingha, China
Technology: Parabolic trough CSP
Capacity: 50 MW with 9 hours of thermal storage
Services: O&M advisory services
Contribution:
- Remote monitoring and performance support
- Written instructions for SF improvements
- HCE breakage recommendations
Ilanga, South Africa
Technology: Parabolic trough CSP
Capacity: 100 MW and 5 hours of storage
Services: O&M advisory services
Contribution:
- Verification of Pylon and Jig Alignment,
- Assembly and Pre-Alignment of Jigs in the
- Assembly Hall
- Supervision and Quality Control of SCE Assembly within the Assembly Hall
- Alignment Verification of SCEs within the Assembly Hall
- Field Inspection and Validation of SCE
- Installation and Alignment
- HCE Tube Assembly Procedure.
- Support for System Commissioning and Integration
